Authorized Reseller
PDUMind · Intelligent Power Solutions
Intelligent Power
Management for
Modern Data Centers
Metered, switched, and 3-phase intelligent rack PDUs with ±1% kWh accuracy, per-outlet remote control, DCIM integration, and cascading management for up to 16 units from a single IP.
16
PDUs per IP
±1%
kWh Accuracy
63A / 80A
Max Input
256-bit AES
Encrypted
16
PDUs Cascaded from One IP
±1%
Billing-Grade kWh Accuracy
36+
Outlets per PDU
48
Max Monitored Outlets
0–3,000m
Altitude Rating
Product Range
Every PDU Use Case Covered
From monitoring-only to fully switched, single-phase to 3-phase enterprise distribution — available through Innovaas.
CPDU-M Series
Metered PDUs
Real-time monitoring of voltage, current, power, and kWh at the inlet and branch level. ±1% billing-grade accuracy with live OLED/TFT display.
CPDU-S Series
Switched PDUs
Per-outlet remote on/off control and timed reboot from any network interface — browser, SNMP, or the IECView iOS app.
CM-V Series
3-Phase PDUs
High-capacity 3-phase distribution for enterprise data halls. Alternate-phase layout balances load across circuits. Schneider breaker protection standard.
Sensor Cascade
Environmental Monitoring
Cascade up to 8 EMD sensors per PDU for temperature, humidity, water leakage, door contact, motion, vibration, and smoke detection.
Product Specifications
Select a Product Line
CPDU Series
Smart Metered / Switched PDU
SUM (Sustainable, Upgradable, Maintainable) design with field-replaceable controllers. Single-phase and 3-phase variants. Active metering for energy optimisation and circuit protection across IDC, banking, government, and enterprise data halls.
| Parameter | Specification |
|---|---|
| Input Voltage | 176–264 VAC, 1-phase or 3-phase |
| Max Input Current | 63A / 80A |
| Max Outlets | Up to 48 |
| Display | TFT Colour Screen |
| Communication | Ethernet, RS485 ×2, USB |
| Cascade | Up to 16 PDUs via RS485 |
| Metering Accuracy | ±1% kWh billing grade |
| Temp / Humidity | Integrated sensors, 0.1°C resolution |
| Alarm Modes | Buzzer, LCD flash, email, SNMP |
| Security | SNMP v1/v2c/v3, HTTPS, 256-bit AES |
| Mobile App | iOS — IECView |
| Operating Temp | -10° to +50°C |
| Humidity | 5–95% RH |
| Altitude | 0–3,000 m |
| Certifications | CE, RoHS |
CM-V Series
3-Phase Monitoring PDU — 36× C39
High-capacity 3-phase distribution for enterprise data halls and colocation racks. Alternate-phase layout balances load across circuits. Aluminium chassis, Schneider circuit breaker protection, IEC60309 industrial input. 1U profile fits any standard 19″ rack.
| Parameter | Specification |
|---|---|
| Model | CM-V-3P16A-36C39-3M |
| Input Voltage | 380–433 Vac |
| Input Current | 16A 3-phase |
| Input Plug | IEC60309 16A 3-phase industrial |
| Frequency | 50/60 Hz |
| Max Power Capacity | 11.5 kW |
| Output Voltage | 220–250 Vac |
| Output Receptacles | 36× C39 |
| Max Circuit Current | 16A |
| Overload Protection | Schneider 1P 16A breaker |
| Dimensions (W×D×H) | 1910 × 56 × 44.5 mm |
| Material | Aluminium — Black |
| Operating Temp | 0–55°C |
| Humidity | 5–95% |
| Altitude | 0–3,000 m |
| Certifications | CE, RoHS |
Need full datasheets, compatibility matrices, or a custom BoM?
Key Capabilities
Built for High-Demand Environments
01
Bi-Stable Latching Relays
70% less energy than standard relays. Outlets retain their state through a PDU power cycle — no mass restart on recovery.
02
PDU Cascading
Chain up to 16 PDUs from a single Primary/Master over RS485, reducing IP address overhead and simplifying subnet management.
03
±1% kWh Metering
Billing-grade accuracy enables precise charge-back, capacity planning, and PUE reporting without additional metering hardware.
04
IEX Universal Socket
C13/C19 combo IEX socket accepts any C14 or C20 plug — no adapters, no hardware swaps when changing server generations.
05
DCIM Interoperability
Native SNMP v1/v2c/v3, Modbus, HTTP/HTTPS, and email alarm integration with third-party DCIM platforms.
06
Dual GbE Network
Two independent Gigabit Ethernet ports allow simultaneous access by data centre management and end clients on separate networks.
07
RCM Residual Current Monitoring
BENDER residual current monitoring dramatically reduces the risk of electric shock and regulatory audit burden.
08
Hydraulic-Magnetic Breakers
Temperature-independent circuit breakers monitor breaker status proactively and alert on high-load risk before a trip occurs.
Why Innovaas
The Right Partner
for Intelligent Power
Power management isn't just a hardware purchase. It affects uptime, energy costs, regulatory compliance, and operational complexity. We help data center teams get it right.
01
Authorized Reseller Status
Innovaas is an authorized PDUMind reseller — direct access to the full product range, official documentation, and manufacturer warranty.
02
Data Center Infrastructure Expertise
Our team understands the full rack stack. We pair PDUMind power management with BST high-speed interconnects to deliver complete infrastructure solutions.
03
Pre-Sales Engineering Support
Load calculations, phase balancing, cascade topology planning, and DCIM integration advice before any purchase order is raised.
04
Competitive Pricing & Lead Times
Direct reseller relationships mean no distributor markup. We provide upfront pricing and realistic lead time estimates from day one.
05
Global Reach, Local Expertise
Headquartered in Singapore with the ability to supply data center operators across the Asia-Pacific region and beyond.
Get in Touch
Talk to a
Power
Specialist
Planning a new data hall. Upgrading an aging PDU fleet. Evaluating intelligent power monitoring for compliance. Our team can help.
PDU selection & phase balancing advice
Load calculation & capacity planning
Cascade topology design
DCIM integration guidance
Pricing & lead time estimates
Direct Contact
sales@innovaas.co